Archive for November 11th, 2019
High Wire
I got in a fair amount of ladder time over the weekend. Cyndie recently dreamt up inspiration to try hanging a line in the yard to allow Delilah to run a bit more freely while still leashed. Her simple prototype worked well enough to spur me into action on an idea we’ve been tossing around for years.
We haven’t completely eliminated all the concerns that have kept me hesitant about doing this before, but as long as we stay in the vicinity when we connect her to it, I’ve decided to give it a try.
I discovered an old roll of twisted-pair fence wire in the shop garage that had more than enough length on it to reach the bottom of the hill and back again, so I decided to double the run for twice the strength. I expect that was probably overkill, but other than making installation a little more work, it doesn’t cost anything at this point. That spool of fence wire was left here by the previous owners and in seven years we had yet to find any other uses for it.
After I had selected the two trees and found enough wire to reach between them, I needed to devise a way to protect the trunks as much as possible. To keep the wire from girdling the trees, I placed a short segment of an old fence post on the far side of each to absorb the extreme tension. This will also spread the wire pressure across a greater area of the trunk.
We ran out of daylight on Saturday before I could finish, partly because I spent the better part of the day absorbed by the Gopher football game on television, so the final challenge of getting the wire taut and secured to the fence pully (which I stole from one of the anchors on the woodshed) became yesterday’s project.
I mulled over how I would possibly rig a way to clamp the wire so I could pull it tight with a come-along, which would then allow me to anchor it around the fence tensioning pully. It occurred to me that all this was a lot like putting new strings on my guitar.
Starting the day yesterday in the shop, I was thinking about bolting two boards together around the wire as a clamp when I spotted a better idea. I don’t know why I never threw away the broken metal tines of an old rake, but it turned out to work perfectly for this task.
I pushed the rake tines through the twists of the fence wire and hooked the come-along to it for pulling.
With that, I was able to get the rig secured and crank the wire tight to my desired result. It is high enough overhead to be out of the way and reaches from the top of the hill to the bottom.
Delilah was a little tentative on the first test, not sure how much distance this would allow her and a little uncertain about the sights and sounds coming from overhead, but she’ll figure it all out soon enough.
Now we can really put the hill to work as an energy-draining workout for our high-energy breed of dog. Afterwhich, we can all rest easier when we head back inside.
.
.