Relative Something

*this* John W. Hays’ take on things and experiences

Watched, Learned

with 2 comments

Last month there was construction on the parking lot at the day-job and I found myself transfixed by the quick and efficient bucket work of a loader. Over and over I watched how the driver scooped up loads from a pile of asphalt debris in a smooth motion.

Last weekend I was able to practice copying what I had seen. I used our diesel tractor to move lime screenings from the pile dumped beside the hay shed, into the paddock to fill rills and washouts on the slopes beneath the overhang.

I was pleasantly surprised by how quickly I succeeded in improving my technique.

The last time I tried this exercise, I had a hard time keeping the bucket from digging into the turf and dirt beneath the pile, and I had trouble with spinning my rear tires and scarring the ground beneath the wheels with deep divots.

.

Striving to emulate what I had seen weeks earlier, I focused on lifting the bucket through the pile in a single fluid motion, not worrying about trying to get the absolute most material in every scoop. I also practiced sliding the bucket into the pile from a few inches above the base, instead of right at the ground level.

It was easy to come back later and use a hand shovel to reshape the pile and scrape screenings away, down to the grass level.

My improved technique resulted in a lot less fuss for me and a lot less muss to the grounds.

Spring-boarding from that success, I took the tractor out again on Wednesday after work to mow the waterway and fence line along our property border to the south. With a dash of lucky good fortune, I executed maneuvers with minimal hassle to complete the mowing in extremely tight space limitations.

That worked so well, I was done with plenty of time to spare and continued positive momentum that led me to steer my attention to the leaning frame of the gazebo.

It is time to put the shade tarp over the frame, so I figured it best to first look into addressing the two bent top frame members. Ad-libbing a plan, I started taking out bolts to remove one section of bent frame. After multiple trips walking back to the shop for needed tools, I got the piece separated.

That led to another trip to the shop to see if I could figure out a way to bend the square tube back to straight and press out the kinks. My luck held and the first try brought success, just as time was running out for the day.

With my concerns about fixing the top tubes assuaged, I decided it would be most prudent to address the settling that has occurred at the base of the four vertical supports, in order to take away that additional play which allowed the structure to lean in the first place.

It just so happens I have a surplus of pavers that should work very nice in creating a new level footing under each of the four legs of the structure.

That’s one of the main projects on my plan for today. That, and wielding my new loader skills to move a large amount of old compost to make room for new.

There’s nothing like putting new skills to good use.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

2 Responses

Subscribe to comments with RSS.

  1. Got tired just reading about your accomplishments!

    obsidcomm

    August 4, 2017 at 6:52 am

    • Imagine doing that at the end of a full workday, at that. Don’t know where the energy burst came from, but I do know to ride with it when it comes!
      When you visit, you will be able to soak up some of the amazing energy this paradise inspires! Some sunny fall day ahead, perhaps?

      johnwhays

      August 4, 2017 at 8:24 am


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: