Relative Something

*this* John W. Hays' take on things and experiences

Taking Action

leave a comment »

After getting home from the day-job yesterday, I went right to work on the ranch-job. This time of year, I don’t get much time at home that isn’t dark, and I wanted to clear snow while I could see well and get it done before temperatures head for the deep freeze.

Light snow fell on and off for most of the day and the thermometer revealed a 39° (F) reading as the high. It made for some sticky-snow plowing. On the drive home, anywhere that had been plowed had pretty much melted clear of snow and the roads were just wet. Our driveway had a thick accumulation covering it.

First things first. I needed to repair the broken cable from the Grizzly winch that lifts the plow blade. I had held off on the fix because I was intending to buy new cable. Searching online I discovered the existence of a short cable made to take the abuse of the constant up and down that occurs to lift the blade, and that they are available not just as metal, but fiberglass, too.

I like the thought of flexible fiber, but then my mind pictured the rollers on my well-used winch setup. The frequent broken strands on the abused cable have scuffed up the rollers a bit and they are getting rusty. I want new rollers if I’m going to get new cable and I haven’t had time to look into what that will take. I don’t know if I can even get the existing ones off without a fight.

Remember how much I struggled to remove the broken bolt on the hitch in back?

So, the first order of business was to head down to the barn and remove the hook with the dangling fragment of cable still hanging on the plow blade. On my way past the shop, I grabbed the battery charger to hook up to the truck that was sitting in the middle of space needing to be plowed.

DSCN4331eI lucked out. My plan worked pretty much as I intended. I got the truck battery charging and then wrestled the blade out the narrow front door of the barn. It fought me a little bit when it came time to lay in the snow and put pins through precisely sized holes of the plow frame and the under carriage of the ATV, but I had a few extra curse words that hadn’t been used yet, so things balanced out.

It was definitely snowman snow, but I just rolled with it as it rolled off the blade in giant chunks. It was well after dark when I finished, but I got enough done that I am comfortable that we are ready for everything to freeze solid as it sits.

I was intent on making sure I was clearing the snow far enough beyond the edges to leave me space for the rest of the winter of plowing. Setting the edges at the beginning is the most important because it will freeze and form the solid boundary for the rest of the season.

I’m satisfied I took appropriate action and achieved that goal. The driveway is clean, the truck started for me and is now parked where I want it by the shop garage and everything looks like a perfect winter wonderland.

Bring on the Arctic cold blast.












Written by johnwhays

January 9, 2016 at 9:30 am

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: