Posts Tagged ‘Stickystone adhesive’
More Prep
I suffered a rough night’s sleep, ruminating about the difficulties we experienced in getting stones to remain attached to the wall with the miracle substance, “StickyStone.” Cyndie and I decided to add a step to our preparation, hoping to finish the project with a higher rate of success by the end of the day yesterday.
I found some moderately rough sandpaper that we used to flatten high points on the underside of the manufactured stones.
On Wednesday, several of the stones would teeter a little after we pressed them into place and I expect that directly worked against a secure bond between the two surfaces. The rough, uneven texture on the back is probably a plus when using masonry mud on a scratch coat to get things to hold firm. We had chosen a method that allowed me to avoid slapping mud around due to my lack of know-how. (Regardless of how many instructional YouTube videos might exist.)
That last added step of preparation seemed to do the trick. Initially, I expected to have more than enough adhesive, but after making so many second and third attempts on Wednesday, the dwindling supply, identifiable by the ever-shortening rod of the plunger in the gun, had me wishing I’d bought a second tube.
I pushed my luck and doled out the adhesive in increasingly smaller doses as we worked our way around the last corner. We finished with almost nothing left in the tube.
For a before and after comparison, this is what one corner looked like before the log home builders trimmed off the bottom portions that were rotting:
They cut them pretty high and framed up the exposed area with treated lumber. By yesterday afternoon, this shows the change:
I will not attempt to remedy the heaving pavers on the ground that have become more problematic every year. We talked to a professional landscaper yesterday who stopped by for a consultation on dealing with the many interrelated issues contributing to the problems.
It leaves me wanting to go home and deal with problems more within my reach, like trying to knock down lush green grass that gets almost too tall for my mower in just a few days after a previous cut.
The added preparation step for mowing the ridiculously tall grass involves a first pass with the string trimmer in the areas of most difficulty. Somehow, that needs to be achieved without too much delay in getting back to mow areas that haven’t gotten out of control yet.
We definitely need the added hours of daylight we’ve been gaining as the planet hurtles toward the summer solstice next month. It’s getting hard for me to remember those wonderful days of winter when so little demand on my time and attention was a dominating theme.
Ah, those were the days.
.
.
Rock Fitting
On the way to the lake yesterday, we dropped Asher off for his in-residence training and he accepted the unfamiliar surroundings without complaint.
Asher is barely visible in the far pen beyond the front area occupied by a dog he didn’t yet know. He passed by this front dog with a brief check, and receiving no response, he decided to ignore it and move on to sniffing every surface in his pen.
We felt it was a great start. Satisfied Asher was in good hands, we hopped in our car and drove the rest of the way to the lake without him.
While we are up here, we are planning to add a finishing touch to the old cabin where the log guys cut off the bottom of rotting logs in March. Having a large stash of faux rocks at home, we brought some up for the job.
These rocks had spent some time as markers in our labyrinth and as a result, developed a layer of dirt that needed to be removed.
That’s fine. We had some time to spare.
After cleaning them up and spreading the rocks out so we could see them, we tried mocking up the layouts for each space.
It seemed like a good plan to me. We felt encouraged by the process and figured the hard work was all behind us. The next phase involved a new adhesive from Techniseal called Stickystone. It is a fast-setting vertical hardscape adhesive.
Unfortunately, it didn’t go as well as my test case back at home. A few rocks had fallen off the foundation of the house in Beldenville so I tested the Stickystone to reattach them and it worked with ease.
For some reason that I haven’t figured out, getting the adhesive to hold the rocks in place up here is only successful about half the time. After completing two of the five surfaces, we were using up the limited supply of adhesive too fast and my patience was dwindling.
We had spent so much time cleaning and prepping that the mounting and remounting had pushed us past the dinner hour. We were tired and hungry and I was very frustrated. Our remedy was a trip to Coop’s Pizza for dinner.
If it’s not too rainy this morning, we’ll try hanging more rocks until the adhesive runs out. I will be looking to focus on the outlook that partial progress is better than no progress at all.
Come to think of it, that’s also one way we will be considering Asher’s training while he is away.
.
.










