Posts Tagged ‘come-along’
Straightening Posts
With my trusty companion, Delilah, tagging along, I lugged tools across the pasture to finally deal with a corner post that had been bugging me for months because of its ever-increasing lean.
Starting with chains and a come-along, I quickly discovered that the angle I was dealing with was compound.
I would need to pull from both directions. There was a problem with that, though. There wasn’t anything to pull against in the second direction.
While Delilah and I surveyed the situation, the neighbors suddenly showed great interest in our presence.
The cows came running up to the fence around their pasture and stared at us expectantly. I think maybe that leaning post was bugging them, too.
Since I couldn’t pull in that second direction, I decided to push. I got the tractor.
It worked pretty slick, although it required a lot of climbing on and off to check the progress. Delilah wasn’t offering any assistance at that point, and I couldn’t see if it was straight from the tractor seat.
Once I had it where I wanted it, there was a long process of trying to pack the soil around the posts to a point that would hold them in place after I released the supporting pressure. In fact, just to be sure, I left the come-along and chains in place overnight, even though I had put the tractor back in the garage.
A little insurance while the soil dries out and settles for the long haul, which I hope lasts for a very long time. Of course, that part about dry soil won’t last long at all. It is supposed to rain again this afternoon and tonight.
I wonder if I packed the soil firmly enough.
.
.
.
.
.
.
.
.
.
.
.
.
Smashing Success
Sunday was a day of major accomplishment. Finally, after a serious thunderstorm tipped multiple trees back in mid-July, we have pulled down and cut up all of those, plus some other dead ones in the area that weren’t affected by the winds.
There were some complicated techniques required to force these large trees to tip back from the direction of their lean, over center and down to the ground. It didn’t all go flawlessly, but they all did go successfully in the end.
The rope rigging that Julian helped get set up on Saturday paved the way for yesterday’s first big success. That tree was key to getting after the one behind it.
While clearing a standing tree from the landing zone, the exercise expanded when that tree didn’t fall free as hoped and became another challenge to our skills.
Cyndie and I had to toss a rope up for leverage to pull so we could coerce it to come all the way down to the ground.
The extra effort of throwing rope and hooking up and operating come-alongs turned the big effort into an all-day project, but it was so thoroughly satisfying to have those trees down after weeks of wanting it done that it didn’t matter.
The chainsaw performed admirably, despite some abusive handling it was subjected to on a couple of occasions when I allowed the blade to get trapped in a pinch.
Beyond that, we are extremely happy to have completed the day injury free. It was a day filled with some dangerous work, but the equipment held up and we avoided the many potentials for calamity.
Despite the gleaming success, I will be very happy if I don’t need to use the chainsaw again for a very long time. I admit, it is an incredibly rewarding feeling when a tree you are trying to bring down finally falls, but it is a strenuous job. Plus, we have so much splitting that needs to be done now, I won’t have any time available to be cutting even more.
.
.
.
.
.
.
.
.
.


