Posts Tagged ‘chicken coop’
Coop’s Up
My carpentry lesson is coming to its conclusion. Yesterday we finished the corner trim and some inside details, bringing us very close to the end of construction. There are several final things on the punch list yet to install, including hardware to critter-proof all the doors and a ramp for the tenants, but we are just about out of excuses for actually getting some birds.
Maybe we’ll get around to taking this to it’s logical conclusion.
Built using substantially salvaged materials, all the way down to some reclaimed nails, it came from this:
.
.
.
.
.
.
.
.
…to become this:
.
.
.
.
.
.
.
.
.
.
.
.
Adding Siding
Record warmth yesterday, and we spent almost all of it chipping away at the somewhat tedious task of siding the chicken coop with salvaged lumber. It feels a little like I’ve made this project more complicated than it deserves, but I justify it in my mind as a good exercise in teaching myself carpentry skills.
I’ve never tried to make cabinets and had no clue about mounting a hinged door. We started small and did the narrow opening for accessing the poop board. It turned out a little too tight, but filing edges has been enough to make it work.
Next, we hung the three-hinge people door. I’m still unsure of the essential details that need to be considered, but somehow I seem to have faked my way through it and ended up with a door the appears to work perfectly.
Working in the hot sun was almost too uncomfortable, but since it is November, it seemed a little inconsiderate to frame that hardship as a complaint.
The warming of our planet does come with some short-term perks in the interim before whatever large-scale calamity will eventually doom civilization as we know it.
Using the boards we salvaged from pallets, we are now slowly but surely working our way up the walls with a piecemeal patchwork of siding. It is creative fun for a while, and then gets a little too tricky around openings and edges that require excessive amounts of measuring and cutting to fit.
Whose idea was it to make this thing so complicated, anyway?
Good things come to those who wait, and with that, I expect to be happy with this mansion of a chicken coop when it is finally completed.
More importantly, it is my hope that some chickens will be very, very happy with it, too.
.
.
.
.
.
.
.
.
.
.
.
Taking Shape
We are getting close. This weekend we got wallboard nailed on the frame of the chicken coop. That closed it up except for the people-door (because we ran out of pieces long enough to use for that opening).
Elysa and Ande stopped by, surprising us with a visit yesterday. They provided some key assistance toward getting all the gaps filled. It was a bit of a Tetris game to match the boards and the spaces over the studs.
Just having additional hands to hold something in place or hand me another nail helped immensely to keep things humming along. My process involves a lot of pauses to plot several steps ahead and then measure, mark, and cut the pieces.
I had a limited number of large boards that I was trying to match with the best possible spaces. When we didn’t have a long enough piece available, the alternative was to use multiples of the shorter boards. There were a lot more of them from which we could choose.
.
.
.
.
.
.
.
.
In one of our design-on-the-fly decisions, Cyndie and I decided to have two horizontal hinged openings on the wall of the nest boxes. The lower one will open downward and create a little shelf to place cartons while collecting eggs. I decided to use the space above the nests, where there will be a slanted board to keep the chickens from perching, as a small, angled storage area.
The upper opening will be hinged at the top and swing upwards to provide full access to the cubby space.
.
.
.
.
.
.
.
.
.
.
When we excitedly got one of the boards mounted on the backside, I realized I’d forgotten about cutting the slot opening for the access door to the poop-board. Now I’ll be doing that after the fact.
That’s the kind of thing that happens when you are making things up as you go along.
.
.
.
.
.
.
.
.
.
.
.
Internal Detailing
When choosing to make it up as you go along, assembly projects can gobble up a lot of time. I had visions of putting up the walls on the new chicken coop yesterday, but never quite got that far. We did make good progress on visualizing the steps we would take to get the internal details finished, despite not actually making the final cuts and screwing the last few things into place.
We started the day by completing the all-important “poop board” assembly that is located underneath the roost branches. We have designed it for a plan of daily sliding the board out for a quick cleaning, scraping off the droppings so they can be composted for fertilizer.
While I was sawing and nailing the bits and pieces associated with that feature, Cyndie worked on making an entrance ramp for the chickens, using branches for the outer frame and then weaving grape vines around them.
Slowly but surely, I devised a plan for how we will secure the edges of hardware cloth with trim boards that I have scrounged from a store of lumber in the garage that has probably been around since the day the house was built.
That means it has been here through two owners before us.
We cut pieces of hardware cloth to cover the window openings on three walls and got those stapled in place. Then I did some work on enclosing the ceiling below the roof structure.
Cyndie cut openings in the plastic bins we are using for the nest boxes and I measured and marked the dividers for those.
It was about that point in the day where things stalled a bit, because I had forgotten twice earlier to take my spare battery to the shop to get it charging.
.
.
.
.
.
.
.
.
Note to self: When working on the last internal details, don’t neglect the other important details of taking care of the equipment that allows you to finish the task at hand.
Eventually, the second battery ran out of power and I was forced to take them both up to be charged. That left me unable to cut anything on which I had marked dimensions.
With luck, that will allow me to make some good progress this morning, quickly cutting the prepared pieces to finish the nesting boxes and securing the last of the hardware cloth beneath the roof.
Then it’ll be time to close the walls, baby.
Oh oh. That means I’ll next need to figure out how I’m going to do the doors. One more thing I’ve never done before in my life.
I’m pretty sure we’re gonna need some hinges…
.
.
.
.
.
.
.
.
.
.
Fighting Wind
Of all the days to try to put on the roof panels, the strong gusting winds we experienced yesterday made it much more challenging than desired. I didn’t help myself any by having previously installed the middle row of plastic panel supports just a little out of line.
Regardless, I am claiming victory and celebrating the completion of the roof. Hurrah!
.
.
.
.
.
.
.
.
George stopped by to inspect our progress and Cyndie snapped a photo while I gave him a tour of the place.
With rain predicted, we decided to try wrapping a tarp around 3 of the walls for the night. Even though I am getting weary of the daily intensity of this project, we’ve reached a point where I pretty much need to forge ahead and get the coop buttoned up and weather-tight.
The bungie-tied partial tarp is not going to cut it for long.
.
.
.
.
.
.
.
.
.
.
.
Decisions Aplenty
By the end of the weekend last night I was mentally exhausted. The chicken coop project was an exercise in repeating waves of cascading decisions. It was giving me a headache. Or maybe that was coming from the muscle fatigue in my neck and shoulders from all the power tool use overhead and at odd angles.
Over and over again I found myself trying to determine precise dimensions, proper positions, ultimate functionality, potential environmental stresses, and likely physical pressures the structure will face.
How high should this be? What support should this have? Will this withstand stormy weather? How will I attach the next board? How will we enclose all the odd openings of our panel roof design?
If all that weren’t complicated enough, by the end of the day yesterday, when I couldn’t get the roof framework equally centered on all the walls, it occurred to me why all my calculations had me constantly confused. Building with scraps of salvaged lumber means working with a lot of warped, bowed, and twisted boards.
It was a great exercise for tempering perfectionistic tendencies.
“Close enough” became a common refrain that grew increasingly easy to accept.
There were so many little steps involved in finalizing the framing of openings in each wall and securely fastening the 4 walls to each other that I ran out of time for the ultimate reward of screwing the panels onto the roof. We got close, but finished just short of that milestone.
Guess what I can’t wait to work on when I get home from work today.
.
.
.
.
.
.
.
.
.
.
Coop Framing
We worked on framing the walls of our chicken coop yesterday under October conditions that changed from cold to warm and alternated between sunny and gray. Twice we received sprinkles of very light rain, yet at a time when there weren’t any clouds in sight that looked like they could possibly be the source.
The weather didn’t slow us down from the task at hand, though, as we designed on the fly to figure out a way to use on-hand 2x4s from a variety of salvaged day-job pallets to frame up the four walls.
.
.
.
.
.
.
.
.
With the addition of a couple long boards I found stored in the rafters over the shop, we were able to come up with everything we needed.
We are hoping to get away with using some plexiglass that has been lying around since we moved here, for windows to provide plenty of light. That will be augmented by translucent polycarbonate panels we purchased for the slanted roof.
The roof is today’s project. Then we need to figure out the ventilation openings that will be covered with hardware cloth to keep out unwanted critters. Siding will follow that. Somewhere in there will be the creation of 4 different hinged openings for access: to collect eggs, to pull out a poop board from under the roost for cleaning, and for chickens and humans to get in and out.
No problem. It only took me a few years to get this far. I’m sure I can have it ready for occupation by…
Never mind that. I’m living in this moment.
The future doesn’t need me trying to tell it what will be.
.
.
.
.
.
.
.
.
.
.
Coop Foundation
Just in case we someday get chickens, I have continued to chip away at a snails pace to design and construct a homemade coop out of mostly found materials. As of this weekend, I have now completed the foundation posts and laid the first floor.
.
.
.
.
.
.
.
.
I’ve reached the point where I should probably commit to the floor plan and figure out how I’m going to build the walls, including the desired doors and windows. The roof is already figured out, as I intend to make it very similar to the one I constructed for the wood shed. The roofing panels are one of the few things we chose to buy for the project.
Most of the lumber for this coop is coming from pallets and shipping crates I have salvaged from the day-job. It’s a benefit for both parties, since the material needs to be removed from our warehouse due to limited storage space.
The foundation posts are from old fencing that was removed shortly after we moved here. Having the coop up on stilts will keep me from needing to sandbag it in protection against the unrelenting downpours that have been turning our soil to soup this year in this new climate we seem to be facing.
The progress of getting the floor in place is a nice milestone, but based on past behaviors, it’s going to be a while before I achieve the next step. There is a lot of uncertainty about construction detail that I need to resolve before I go throwing up walls willy nilly.
That, and the fact that I have yet to settle on an actual design for where doors and windows will be, and how I will construct them.
Details, details.
.
.
.
.
.
.
.
.
.
.
.
Multiple Designs
My poor little brain is getting a workout lately with a mixture of simultaneous design projects outside of my realm of experience. I want to build a bridge over a ravine, buy and install a signal booster for voice and data, and make a chicken coop out of found material.
At the same time, we still need to purchase and transport more hay for the winter, clear downed trees, cut and split firewood, keep the lawn and labyrinth mowed, and turn the composting manure piles.
All these latter tasks are the reason the design projects tend to get put off until later. I already know what to do to accomplish them, so I’m more comfortable filling time making progress on familiar work that needs to be done.
It is a source of some conflict between Cyndie and me. I struggle to figure out in my mind how each step will proceed, hoping to establish an order of assembly and final functionality. It tends to delay visible progress for a long time. Cyndie fearlessly dives into projects, solving problems as they arise and devising creative solutions in order to get things done.
I’ve heard that opposites attract.
Meanwhile, I’m chipping away at progress on the designs. We have had a long run of very poor connectivity and dreary news reports on possible plans for service upgrades. After the recent addition of a new cell tower nearby provided no noticeable improvements, a signal booster has become our next big hope.
Last week, I timidly scrambled around the portions of our rooftop that weren’t too steep, in search of a decibel reading on my phone. I am supposed to find the spot for the directional antenna that will keep it from pointing back across the house. Then I need to figure out how to get a cable from out there into the attic. Finally, I need to determine a location for the inside antenna and get it installed to beam the amplified signal to our devices.
I wish that was as easy to actually do as it was to write out.
This weekend we cleared the last of two stumps that were in the way of our perimeter path around the back pasture. That brought us to the next obstacle, the ravine. It has bumped up our interest in having the bridge installed to facilitate foot and mower traffic around the entire circumference.
Also during the week, I drove the truck to work so I could bring home a couple large panels from a crate we had received that I felt would make a good floor for a chicken coop. That has helped us lock in a plan on size and enabled progress on burying support posts.
Three design projects that I am uncomfortably unsure about how I will ultimately complete to my satisfaction, but which have some momentum in play. With Cyndie’s help, we’ll keep making progress despite my inclination to wait and think on them a little bit more everyday.
.
.
.
.
.
.
.
.
.
.
Cool Skills
It was hot yesterday, and tropically humid. That double whammy is enough to alter our choice of activities. That goes for the horses, too. Cyndie put a halter on Legacy in a plan of walking him out to a shadier and breezier spot to graze. She reported that he responded with a sigh and a look spoke volumes to her.
He didn’t want to expend the energy of walking to a potentially better spot.
Maybe that is what inspired Cyndie to find a way to emulate Legacy’s attention to self-preservation. She offered to help me prepare the rest of the pallets I have been collecting from work. I looked up to find her hammering with one hand while sipping an ice-cold smoothie gripped in the other.
Now that’s efficiency.
I wish I could manufacture some of that efficiency for myself. It would come in handy for actually turning a pile of pallets into a structure that will house and protect some chickens.
In case someday we ever actually get chickens.
.
.
.
.
.
.
.
.
.
.
.
Relative Something 