Posts Tagged ‘building chicken coop’
Decisions Aplenty
By the end of the weekend last night I was mentally exhausted. The chicken coop project was an exercise in repeating waves of cascading decisions. It was giving me a headache. Or maybe that was coming from the muscle fatigue in my neck and shoulders from all the power tool use overhead and at odd angles.
Over and over again I found myself trying to determine precise dimensions, proper positions, ultimate functionality, potential environmental stresses, and likely physical pressures the structure will face.
How high should this be? What support should this have? Will this withstand stormy weather? How will I attach the next board? How will we enclose all the odd openings of our panel roof design?
If all that weren’t complicated enough, by the end of the day yesterday, when I couldn’t get the roof framework equally centered on all the walls, it occurred to me why all my calculations had me constantly confused. Building with scraps of salvaged lumber means working with a lot of warped, bowed, and twisted boards.
It was a great exercise for tempering perfectionistic tendencies.
“Close enough” became a common refrain that grew increasingly easy to accept.
There were so many little steps involved in finalizing the framing of openings in each wall and securely fastening the 4 walls to each other that I ran out of time for the ultimate reward of screwing the panels onto the roof. We got close, but finished just short of that milestone.
Guess what I can’t wait to work on when I get home from work today.
.
.
.
.
.
.
.
.
.
.
Coop Framing
We worked on framing the walls of our chicken coop yesterday under October conditions that changed from cold to warm and alternated between sunny and gray. Twice we received sprinkles of very light rain, yet at a time when there weren’t any clouds in sight that looked like they could possibly be the source.
The weather didn’t slow us down from the task at hand, though, as we designed on the fly to figure out a way to use on-hand 2x4s from a variety of salvaged day-job pallets to frame up the four walls.
.
.
.
.
.
.
.
.
With the addition of a couple long boards I found stored in the rafters over the shop, we were able to come up with everything we needed.
We are hoping to get away with using some plexiglass that has been lying around since we moved here, for windows to provide plenty of light. That will be augmented by translucent polycarbonate panels we purchased for the slanted roof.
The roof is today’s project. Then we need to figure out the ventilation openings that will be covered with hardware cloth to keep out unwanted critters. Siding will follow that. Somewhere in there will be the creation of 4 different hinged openings for access: to collect eggs, to pull out a poop board from under the roost for cleaning, and for chickens and humans to get in and out.
No problem. It only took me a few years to get this far. I’m sure I can have it ready for occupation by…
Never mind that. I’m living in this moment.
The future doesn’t need me trying to tell it what will be.
.
.
.
.
.
.
.
.
.
.
Relative Something 