Relative Something

*this* John W. Hays' take on things and experiences

A Day

leave a comment »

The day starts early, when Delilah announces she is awake and wants to get out of her crate. Yesterday, it was 5:30 a.m. I take her out for a short walk and then grab some breakfast before heading down to feed the horses. I put out 4 pans of processed feed and walk to the far end of the paddock to open a gate that allows them access to the grazing pasture. Normally, I also grab the wheelbarrow and collect any overnight deposits of fertilizer.

On this day, I planned to grant Cyndie her wish to have a mowed path inside the fence of the hay-field for riding horses. She also asked me to cut the area where we envision putting a riding arena. In order to do that, I would need to disconnect the new chipper from the back of the tractor and remount the brush cutter.

We have been without the loader bucket on the diesel tractor for some time, as it was taken to a weld shop for use as a template for a new hay-fork we are having built. The bucket was returned to us on Saturday, and I was excited to finally be able to put it to use. As long as I had the chipper removed, I thought I would scoop up the last of the winter pile of manure in the paddock before hooking up the brush mower.

That bucket can move a lot more stuff in one scoop than the pitchfork and ATV trailer method I had been using. The challenge then became figuring out where to dump the very heavy load. I got stuck trying to back out of my chosen dump spot, spinning two big divots in the gravel driveway.

Earlier, I had been moving a pile of unusable hay from the hay shed using a wheelbarrow, to make room for the new bales. As I drove by on the tractor, it occurred to me that I could move a lot more hay at one time with the bucket. I scooped up a huge amount and headed up to where we are filling in a ravine above the barn, just off the paved driveway.

I knew I was taking a risk as I dropped down off the pavement and partway into the ravine. I tipped the bucket to dump the hay and then tried backing up. No luck. Both large tractor tires spinning. I needed to use the bucket to push myself out, wreaking havoc on the lawn the whole way up. There is a reason the diesel tractor is not the best tool when the ground is wet.

Before I got myself in any more trouble, I headed up to get the brush mower attached. I was a little worried about running into trouble mowing wet areas of the field, but it turned out to be okay. I cut a path around the perimeter and then knocked down an area in the rough size and shape of a riding arena. It’s not possible to cut right up to the fence, so I went and got the trimmer to clean up the edges.

DSCN2100eDSCN2101e.

.

.

.

.

.

.

.

I am not the fastest guy when it comes to doing things, and the trimming is a project I could work on all day and not get everything cut, so I made a point to only go part way along the fence line. I was aware that I started shortly before time to feed the horses in the afternoon, and I didn’t want to leave them feeling neglected. They were anxiously waiting at the gate for me when I arrived.

While they ate, I went back to hauling hay with the wheelbarrow, taking one short break to make a pass through the paddock to collect the day’s production of fertilizer. When Cyndie called to check in and report she was heading home, I was surprised to discover it was 6:30 p.m.

Trimming isn’t done, and removing old hay was not completed. Even with long days, there isn’t enough time to get everything done. Those chores will carry over into today, along with the plan to haul more loads of hay from our supplier, and with luck, get started on this week’s lawn mowing.

All in a day’s work!

.

.

.

.

.

.

.

.

.

.

Written by johnwhays

July 16, 2014 at 6:00 am

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.